LIGHT COLOR OPTIONS

Red, White, or Blue

EXAMPLES

**Disclaimer**

Kickplates consist of Original factory kickplate base, plexiglass, professional utdoor grade vinyl overlays, illiminated tape with power converter, 10 ft of power ground wire, zipties, T-Taps, and a large zip tie for running the wires. Instructions with pictures are included!

Modified by rjdmmfl1 at 2:14 PM 7/1/2008

Modified by rjdmmfl1 at 5:02 PM 7/1/2008

Modified by rjdmmfl1 at 1:29 AM 7/2/2008

Modified by rjdmmfl1 at 9:54 PM 7/17/2008

Modified by rjdmmfl1 at 11:16 PM 7/22/2008

The font DJ choose makes a bid difference IMHO.. it "pops"

Wheres the O in nismO... non-illuminating/.

the o lights up, just not as bright.. we did a layer of red transparent vinyl undr the o... not a great replroduction of what it looks light on this picture (also, the little 12 volt battery i used to wire all of these was dying quickly!), but the red will stand out during the day, and be brighter at night!

Doc I'll send you e-mail and payment when I get out of work tonight!

i would send the money now but i'm not sure how much my order will come out to.

i want CF plate supplied by you, since I do not have one, white lighting and either "Altima" or "nismo" lettering. regular shipping is fine.

on a side note. if you stick a few red LED's as opposed to white back there the red will show up much better.

regarding payment, no lists, no favorties... its first come first serve! the previous list was just to gauge the interest, since no one sent in a deposit with that list, no one is actually held accountable to purchase (other than being a man of their word)... but I do need folks to follow through with this!

Regarding the lighting, I have a set way of doing these kickplates that allows for maximum lifespan of the lights.. its not something that can easily be altered and I don't use led's, but thank you anyway for the constructive comment!

you supply kickplate/CF/White light/"altima" or nismo" lettering.

i wasnt sure if "Altima" was or considered "standard"

also...thanks for not taking it personally.

regarding price.. please see the list.. from there, you can picj out what you want and send that amount... in the notes section on paypal, be sure to include all relevant information regarding your order, including light color. Thanks!

check your email...

I want to brushed aluminum with Altima in white. Let me know so I can paypal right now.

BlackNWhite's Mod List

Let me know if I owe you more.

PHILADELPHIA EAGLES
BOSTON RED SOX
VIRGINIA TECH HOKIES
DETROIT RED WINGS

Quote, originally posted by skilled44 »

Also to add to my last post can we pick the font for our custom text and what address should we ship our kick plates to...let me know, thanks

custom include any font you would like, let me know in the paypal notes...

also, please do not send deposit, just send me the entire amount this Thursday!

see 1st post for mailling address!

Robert TCOB!

Hey Rob, if you aren't using LED's in these, what are you using? Any concern with these getting hot after time and if the light goes out we can replace em?

Can't wait to install these-- they look friggen pimp!

My Modded 2008 Nissan Altima Coupe 3.5SE

its like a glow tape, i forget what it is called

its called light tape, el tape, etc. It has a lifespan of about 10,000 hours.. the power inverter has a lifespan of maybe 2000 - 3000 hours.... you should never have to replace the el tape, but maybe, in 5-6 years, you may have to replace the Power inverter.. and those are standard and only cost about $7

I had to replace the power inverter on my El glo speedometer / gauge kit on my old car after a couple of years.. but that power inverter was used all the time when driving to power the gauges, the way the kickplates are wire, they will ONLY come on when the door is open, so they should last MUCH longer

...wait...that came out wrong...

I think that's a new sig quote right there

yes, working on them tonight

hehhe

He has kickplates for his and would like them to illuminate as well. He wants to know how much you would charge him. He has kick plates in the front and back... but the back ones are really small. Let me know, thanks.

Also, you haven't responded to my e-mail or voicemail I left you. Let me know if I need to send you some extra cash.

again.... DO NOT WASTE MY TIME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Daniel, this was not directed towards you (but you already know that)

are the aluminum kckplates you use the same as the ones on the nissan website?

i wanted to change my order from carbon fiber to aluminum but if you wanted to i could place my order on nissanparts.com and have them shipped to you. i lik the lines from the OEM ones and i cant see them in the pictures you have up here but it could be the angle i'm looing at it from.

let me know. thanks.

Modified by hopetriumphs at 9:36 AM 7/3/2008

sorry, i've been swamped...

yes, these kickplates are the oem ones, I remove the alumnium piece, and replace it with clear plexiglass, with either a carbon fiber overlay or bshed aluminum overlay..

I can't do the OEM lines... sorry

also, you asked for carbon fiber, so you still owe me another $15 ($235 total for carbon fiber, Altima)

Folks, please, in the future , do not change your orders, it takes too much time to go back and change orders with the print shop...